NEC Express5800 Series User Manual page 19

– Alignment Errors: Broken packets for collision
– FCS Errors: Broken packets for collision
– Carrier Sense Errors: Cable disconnected, Cable defect, or Transceiver defect.
Transmission retry percentage ⎯ Percentage of collision errors of total transmitted
packets per monitoring cycle. There is a possibility that network traffic to this server is
extremely heavy. Please reduce the network traffic to this server. Otherwise the network
device may have defects.
Transmission about percentage ⎯ Percentage of packets disposed due to excess collisions
errors, etc. per monitoring cycle. There is a possibility that network traffic to this sever is
extremely heavy. Please reduce the network traffic to this server. Otherwise the network
device may have defects.
From the HW eventlog tab you can set the following information:
Sample Interval ⎯ HW eventlog monitoring cycle. The range is 1 to 9999 seconds.
Using the NEC ESMPRO Agent 15