Table of Contents
Advertisement
Quick Links
U S E R M A N U A L
HT 216 / HT 416 - Maritime Rack Computers
HT 216 xxx-Ayyy
HT 416 xxx-Ayyy
xxx=standard or customized
yyy=configuration dependent
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
User Manual HT 216 / HT 416
Updated: 02 May 2012
Doc Id: INB100084-1 (Rev 14)
Created: 363
Approved: 6987
Advertisement
Table of Contents
Related Manuals for Hatteland HT 216
Summary of Contents for Hatteland HT 216
- Page 1 Updated: 02 May 2012 Doc Id: INB100084-1 (Rev 14) Created: 363 Approved: 6987 Please visit www.hatteland-display.com for the latest electronic version of this manual. Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com...
- Page 2 Information in this manual is copyrighted to the respective owners. All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent of Hatteland Display AS.
-
Page 3: Table Of Contents
Sliding Rails - HT 00250 OPT-A1 ............. 16 Computer Upgrade Precaution Note ..........17 Operation ..................18 Front area - HT 216 computer ............18 Front area - HT 416 computer ............18 Physical Connections ...............20 Connector area - HT 216 computer ..........20 Connector area - HT 416 computer ..........20... - Page 4 Technical Drawings - HT 00250 OPT-A1 .......... 32 Appendixes ................33 Pinout Assignments - Common Connectors ........34 Pinout Assignments - HT 216/HT 416 Additional COM Ports ... 36 Trouble-shooting ................37 Declaration of Conformity ..............38 Return Of Goods Information ............39 Terms ....................40...
-
Page 5: Contents Of Package
USB memory stick/network Windows® to the operating system. You can alternatively download the drivers from our MEDIA STD01 website www.hatteland-display.com 1 pcs of cable relief bracket including screws. Test Reports papers: 1 pcs of Product Declaration... - Page 6 This page left intentionally blank INB100084-1 (Rev 14)
-
Page 7: General
General INB100084-1 (Rev 14) -
Page 8: About This Manual
About Hatteland Display Hatteland Display is the leading technology provider of specialized display and computer products, delivering high quality, unique and customized solutions to the international maritime, naval and industrial markets. -
Page 9: Computers Introduction
19” rack mount, 2U, 3U and 4U. We continually develop our computers portfolio to make the best use of emerging computer technology so you can be sure that your Hatteland Display computer offers the power needed to run modern applications, with the flexibility to be installed wherever you want, for any marine use. -
Page 10: Basic Construction
Basic Construction Exploded View HT 216 General illustration General INB100084-1 (Rev 14) IND100077-89... - Page 11 Basic Construction Exploded View HT 416 General illustration General INB100084-1 (Rev 14) IND100077-89...
-
Page 12: Product Labels (Examples)
Barcode 128 (TYP+SNO) Label Size: 6cm x 2cm Serial Number Label Nomenclature AA XXX AAA-Axxx-XXXXXX NOMENCLATURE - A=Letters, X=Numbers HT 216 STD-A111-000005 Example || ||| ||| |||| |||||| || ||| ||| |||| ¤----- Serial Number, 7 digits || ||| ||| |¤¤¤------- Configuration ID (for components like memory, storage etc.) -
Page 13: Installation
Installation INB100084-1 (Rev 14) -
Page 14: Installation And Mounting Of Computers
The classification is only valid for approved mounting brackets provided by Hatteland Display. The unit shall be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of mounting might require test and re-classification. -
Page 15: Cables
General Installation Recommendations Cables Use only high quality shielded signal cables. For RGB/DVI cables use only cables with separate coax for Red, Green and Blue. Configuring DC power input housing connector FIG 3 Note: Only applicable for certain models! FIG 1 For installations that require DC power input, use the provided 2-pin DC Power Input housing with internal cable screw terminal. -
Page 16: Sliding Rails - Ht 00250 Opt-A1
General Installation Recommendations Sliding Rails - HT 00250 OPT-A1 Suitable for use with 19 Inch rack mounting. Load rating up to 52kg, 9.6mm slide thickness. Lock-out. Front Disconnect. Optional enclosure mounting brackets. Note: Manufactured by 3rd party. Sliding rails representation below are simplified in terms of visual appearance. -
Page 17: Computer Upgrade Precaution Note
General Installation Recommendations CAUTION This unit contains electrostatic sensitive devices. Observe precautions for handling. Computer Upgrade Precaution Note Users who needs to open the computer to change PCI cards, install more memory, or set internal jumpers can do so without voiding the warranty. Before opening a unit’s housing to remove or touch a board, proper ESD measurements must be taken! 1. -
Page 18: Operation
Operation Front area - HT 216 computer The unit’s operational controls and air filter are located behind the lockable front hatch. Air Filter 1: Showing unit with hatch closed and front lock. 2: Press gently the 3: Showing unit with hatch open to reveal both user front lock inwards and controls and air filter. -
Page 19: Power Led
Operation HDD TRAY 1,2,3,4: Replaceable HDD tray bay which supports 3.5” SATA hard drives. The amount of HDD available and installed is configuration dependent. By factory default, 1 x HDD is installed. Any HDD should not be replaced or dismounted from the unit while the operating system is running and the computer unit is turned on. -
Page 20: Physical Connections
Physical Connections Connector area - HT 216 computer Note: PCI slots may provide DVI-I or other functionality not visible in the general illustration below. PCIe X4 Network GBLAN Power Input COM 2 PCIe X16 (add2) Mic In, Front Out, Line in... -
Page 21: Power Input
Physical Connections Power INPUT: The internal AC power module supports both 115VAC/60Hz and 230/50Hz power input using a standard IEC European power plug. See specifications for more information. LPT1 Parallel Port INPUT/OUTPUT: Standard LPT1 Printer/Parallel (SPP/EPP/ECP) port using a D-SUB 25P Female connector. Fasten the cable to the connector using the provided screws on the cable housing itself. - Page 22 Physical Connections COM1 Serial Port INPUT/OUTPUT: Supports RS-232 using D-SUB 9P male connector. Fasten the cable to the connector using the provided screws on the cable housing itself. COM2 Serial Port INPUT/OUTPUT: Supports RS-422/RS-485 (electronically isolated) using D-SUB 9P female connector. Fasten the cable to the connector using the provided screws on the cable housing itself.
-
Page 23: Specifications
Specifications INB100084-1 (Rev 14) -
Page 24: Specifications - Ht 216
• Suppors rear PCI card support holder, fixed to chassis • 5 x Internal Cooling fans such as: High & Low pressure, PSU, CPU & PCI. Compass Safe Distance : HT 216 STx-Axxx Standard: 140cm - Steering: 80cm MTBF (Mean Time Between Failures) : 24790 hours A P P R O V A L S &... -
Page 25: Specifications - Ht 416
= Microsoft® Windows® Embedded Enterprise (Win Server 2008 Eng, 32bit) For a full overview of typenumbers, please review the following link: www.hatteland-display.com/pdflink/ind100780-5.php M E C H A N I C A L D E S C R I P T I O N... - Page 26 This page left intentionally blank INB100084-1 (Rev 14)
-
Page 27: Technical Drawings
Technical Drawings INB100084-1 (Rev 14) -
Page 28: Technical Drawings - Ht 216
Technical Drawings - HT 216 INB100084-1 (Rev 14) IND100132-158... -
Page 29: Technical Drawings - Ht 416
Technical Drawings - HT 416 INB100084-1 (Rev 14) IND100132-159... - Page 30 This page left intentionally blank INB100084-1 (Rev 14)
-
Page 31: Technical Drawings - Accessories
Technical Drawings - Accessories INB100084-1 (Rev 14) -
Page 32: Technical Drawings - Ht 00250 Opt-A1
Technical Drawings - HT 00250 OPT-A1 [0.39] 9,90 19” Rack Sliding Rail INB100084-1 (Rev 14) IND100132-198... -
Page 33: Appendixes
Appendixes INB100084-1 (Rev 14) -
Page 34: Pinout Assignments - Common Connectors
Note: The table above lists commonly-used RS-232 signals and pin Pin 1: Video Signal Ground Shield assignments, however Serial Communication for Hatteland Display products may vary from product to product to support different end user systems. Please check additional pin assignments section in this manual for specific RS-232/RS-422/RS-485 pin assignments for your exact product. -
Page 35: User Manual
Pinout Assignments - Common Connectors Pin Assignments - 25P Parallel 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Pin 01 - STROBE This signal indicates to the printer that data at PD7..0 are valid. Pin 02 - DATA0 Parallel data bus from PC board to printer. -
Page 36: Pinout Assignments - Ht 216/Ht 416 Additional Com Ports
Pinout Assignments - HT 216/HT 416 Additional COM Ports The unit can be configured for RS422 / RS485 communication via a DIP switch SW1. The switches are named DIP1-8. The DIP switch is located on the communication card mounted on the motherboard which are connected to the units 9P D-SUB Comports at the rear of the unit. -
Page 37: Trouble-Shooting
(HT/HM C01 with WinXP only) or it is included as a image on the USB Flash Kit for HT 216, HT 416, HT B17, HT B18 and HT/HM C01 (Win7 only) computer models. The recovery image fi le is not accessible from any operating system, only by the Recovery Kit (USB Flash) provided by Hatteland Display. -
Page 38: Declaration Of Conformity
Declaration of Conformity We, manufacturer, Hatteland Display AS Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HM NMD, HM MIL, HM CMD, HT STD, HD MMD, HM MMD, HT MMC and HD MMC product ranges is in conformity with the following standards in accordance with the EMC Directive. -
Page 39: Return Of Goods Information
Return of goods: (Applies not to warranty/normal service/repair of products) Hatteland Display referenced as “manufacturer” in this document. Before returning goods, please contact your system supplier before sending anything directly to manufacturer. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned. -
Page 40: Terms
Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Hatteland Display AS charge NOK 50,- in forwarding fee for orders below NOK 1000,-. Freight charge according to expenses for orders above NOK 1000,-. VAT not included. - Page 41 Terms 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier.
- Page 42 Notes Appendix INB100084-1 (Rev 14) IND100077-24...
-
Page 43: Revision History
Revised comports (1 male/1 female), page 22,24,25 Revised trouble-shooting text to difference between locations of Recovery Image, page 37 Added FCC notice and logo, page 38 02 May 2012 Changed 250GB to 500GB, page 24,25, reference to: http://www.hatteland-display.com/mails/29_2011_ecn.html INB100084-1 (Rev 14) IND100077-90... - Page 44 w ww .hat tel and-di s p l ay . com...
Need help?
Do you have a question about the HT 216 and is the answer not in the manual?
Questions and answers