Yamaha YZF600RP Owner's Manual page 70

1. Clamp screw (× 2)
2. Right air intake duct
8. Remove the right air intake duct by
loosening the clamp screws.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Radiator cap
9. Remove the radiator cap.
WARNING
_
Never attempt to remove the radia-
tor cap when the engine is hot.
_
10. Place a container under the en-
gine to collect the used coolant.
11. Remove the water pump drain bolt
to drain the cooling system.
12. Remove the cylinder drain bolts to
drain the cooling system.
6-18
1. Water pump drain bolt
2. Cylinder drain bolt (× 2)
13. After the coolant is completely
EW000067
drained, thoroughly flush the cool-
ing system with clean tap water.
14. Install the water pump drain bolt
and cylinder drain bolts, and then
tighten them to the specified
torques.
Tightening torques:
Water pump drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lb)
Cylinder drain bolt:
7.0 Nm (0.7 m·kgf, 5.1 ft·lb)
15. Pour the specified amount of rec-
ommended coolant into the radia-
tor and reservoir.
6