Lan - D-Link DSL-2540U User Manual

Section 3 – Configuration

LAN

You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP
service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the
Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses
available in the DHCP IP address pool will change automatically if you change the IP address of the Router.
To access the Local Area Network (LAN) Setup window, click the LAN button in the Advanced Setup directory.
This window allows you to set up a LAN interface. When
you are finished, click either the Save or Save/Reboot
button.
Note:: After you complete the configuration, click the Save
button, a dialog box will pop-up to hint users to reboot
device to make configuration effectively
D-Link DSL-2540U User Manual 41