Basic Operation - Sharp AY-ZP48LZ Operation Manual

BASIC OPERATION

1
2
1
4
2
3
3
4
6
Press the COOL, DRY or HEAT button .
: HEAT
: COOL
: DRY
• The red OPERATION lamp (
will light.
To change the temperature setting,
press the THERMOSTAT button.
HEAT/COOL MODE
• The temperature can be set within the
range of 18°C to 32°C.
DRY MODE
• The temperature can be changed up to 2°C
above or below the temperature automatically
determined by the unit.
(Example: 1°C higher)
(Example: 2°C lower)
To change the fan speed, press the FAN
button.
AUTO SOFT LOW
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
To turn off the unit, press the STOP
button.
• The red OPERATION lamp (
unit will turn off.
) on the unit
HIGH
) on the