External Antennas And Sens Switch - Grundig FIELD RADIO S450DLX Owner's Manual

Am/fm/shortwave field radio with lcd backlight display and signal strength indicator
Hide thumbs Also See for FIELD RADIO S450DLX:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
S450DLX
OWNER'S MANUAL
EXTERNAL ANTENNAS
FM/SW EXT. ANT. – this socket, on the back of the radio is primarily
for antennas designed to be fed with 50 or 75 ohm coaxial cable,
such as dipoles or comparable antennas. It can also be used for long
wire antennas. Use F plugs for feeding this socket.
ANT. SENS SWITCH: EXT or INT
(right side of radio)
Use this switch to enable the use of FM or SW internal or external antennas.
MW EXT. ANT. – This is a 500 ohm impedance socket, for use with long wire
antennas.
USING THE GRUNDIG AN200 ANTENNA FOR
IMPROVED AM(MW) PERFORMANCE
(not included)
The AN200 AM broadcast band (MW) loop antenna or any similar model
does not need to be plugged in, simply set it next to the radio and tune it
to the same frequency that the radio is tuned to. Swivel the radio and the
antenna to achieve maximum performance. This antenna can be purchased
by contacting Eton or one of our distributors. Call us for details.
14

Advertisement

Table of Contents
loading

Table of Contents