2.
In the validated channel status zone, use the arrow key to
select the boot device and press
Note:
1.
Set Boot Disk
The
disk is connected to IDE on motherboard.
2.
After the boot disk is set, its status will become Boot.
Highpoint ATA RAID Management Software
Install Software
Insert SOYO driver utility CD, Highlight the driver HighPoint Utility
for Win 9x/ME/2000/NT/XP and click ok
To manually install the RAID Administrator, insert the SOYO driver
utility CD, then browse to the path "d:\ utility\disk1\setup.exe"
After the installation is complete, restart the computer. With the
implicit option, the setup program will create program group:
--> Program-->HighPoint. This program group contains the
following contents:
•
Highpoint ATA RAID Management Software
•
Readme
•
Uninstall Highpoint ATA RAID Management Software
Enter
item appears on condition that no hard
88
to confirm.
Start