SOYO SY-P4S DRAGON Ultra User Manual page 117

please operate at this time. If all devices have been
successfully installed, please go to next.)
Install driver during Windows XP installation
1. Go to "d:\raid\\hpt372\" directory, (assuming that your
CD-ROM is drive d) copy all the files and directory to a
floppy disk.
2. Booting from CD-ROM, when the
screen appear and prompt user to press F6 key to install third
party SCSI or RAID driver, please press F6 Key.
3. Press S
XP Setup
4.
The system will ask whether to install driver under
under Windows
Windows XP.
5. Insert the floppy disk of driver, then press
6. In the follow-on window of device type, please select
HPT370/HPT372
Windows XP
7. Win XP will prompt you that a message that the driver is
newer than the default driver, press S to continue.
8. The follow-on interface will list the devices to be installed, in
which HPT370/ HPT372 UDMA/ATA RAID Controller
should be included. (If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)
9. Press ENTER to continue Windows XP setup.
How to Verify if the HPT372 RAID Controller Setup
is Successful
Verify Installation on Windows 98/98SE/ME
When the driver has been successfully installed and the computer
restarted:
key to specify additional devices when the
window appears.
XP, please select to install driver under
UDMA/ATA
to continue.
Windows XP Setup
RAID
113
blue
Windows
WinNT
Enter
to continue.
Controller
item
or
for