Motorola APX 7000 User Manual page 156

The two options of priority for the Voice Announcement
available are:
•
High – enables the voice of the feature to announce even
when the radio is receiving calls.
•
Low – disables the voice of the feature from announcing
when the radio is receiving calls.
Procedure:
You hear a voice announcement when the features below are
preprogrammed in the radio.
•
The radio powers up. The radio announces the current zone
and channel it is transmitting.
•
Press the preprogrammed voice announcement button
(which specifically programmed to playback the current zone
and channel). The radio announces the current zone and
channel it is transmitting.
Note: Pressing this preprogrammed playback button will
always enable the voice feature to announce in High
priority.
All the three programmable buttons at the side of the
radio support this feature.
136
English
•
Change to a new zone. The radio announces the current
zone and channel it is transmitting.
•
Change to a new channel remaining within the current zone.
The radio announces the current channel.
•
Press either the Menu Select button or preprogrammed
button or switch of the radio to launch or terminate Scan, PL
Disabled, Talkaround/Direct or Transmit Inhibit. The radio
announces the corresponding feature activation or
deactivation.