Configuration; Easy Search Utility - D-Link DNS-323 User Manual

Section 3 - Configuration
When first powered on, during the initial boot sequence, the DNS-323 will wait to be assigned an IP address via DHCP. If it
does not receive an assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32. It is recommended
to use the included D-Link Easy Search Utility when accessing and configuring the DNS-323 for the first time. If you want to
change the IP address before logging in or are unable to connect to the DNS-323 IP address, you can use the Easy Search
Utility provided on the product CD to locate the device on your network and make any needed changes.
The Easy Search Utility displays all available DNS-323
Network Storage
Device devices on the network here.
Refresh Refresh the device list.
Click Configuration to access the Web-based utility of

Configuration

the DNS-323.
Language Click Language if you wish to store non-English character
files. Refer to page 74.
Click BitTorrent to use the built-in BitTorrent manager to
BitTorrent
upload and download Torrents. Refer to page 59.
LAN Configure the LAN Settings for the DNS-323 here.
Apply Click Apply to save and activate the changes to the LAN
Settings.
Drive Mapping Volumes available for mapping are displayed here.
Choose an available drive letter. Click Connect to map
Available Drive
Letters the selected volume. Click Disconnect to disconnect the
selected mapped volume.
Click Exit to close the utility.
Exit
D-Link DNS-33 User Manual
Configuration

Easy Search Utility

1