Setting Continuous Bake Or 12 Hour Energy Saving - Kenmore 790.3103 Use & Care Manual

Setting Oven Controls (con't)

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER and FLEX CLEAN
Timer
Set/Off
oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is
left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous
Baking.
INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour Energy
Saving features
1. Press and hold
Timer
Set/Off
-h" will appear in the display and the control will beep once.
Flex
2. Press to switch between the 12 Hour Energy Saving and
Clean
continuous bake features. Note: "12h" (Figure 2) in the display indicates
the control is set for the 12 Hour Energy Saving mode and "- -h"
indicates the control is set for the Continuous Bake feature (Figure 3).
3. Press to accept the change (Figure 4; display will return to
START
time of day) or press
Setting Kitchen Timer
The TIMER pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that
Timer
Set/Off
will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
INSTRUCTIONS
To set the Kitchen Timer (example for 5 minutes)
1. Press Timer . "--:--" will appear and "TIMER" will flash in the display
Set/Off
(Figure 5).
2. Press the number pads to set the desired time in the display (example
5 ). Press
START
"TIMER" will stay in the display (Figure 6). Note: If
pressed the timer will return to the time of day after 25 seconds.
3. When the set time has run out, "End" and "TIMER" will show in the
display (Figure 7). The clock will sound with 3 beeps every 5 seconds
until is pressed.
Timer
Set/Off
To cancel the Kitchen Timer before the set time has run out
Press . The display will return to the time of day.
Timer
Set/Off
To Set Add 1 Minute Feature
Add 1
The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the
Minute
added to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the
pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.
Flex
pads control the Continuous Bake or 12 Hour Energy Saving features. The
Clean
for 7 seconds (Figure1). After 7 seconds "12h" or "-
to reject the change.
STOP
. The time will begin to count down with "5:00" and
PRESS
Timer
Set/Off
seconds
or
PRESS
5
is not
START
18
DISPLAY
TIMED DELAY TIMER
DOOR LOCKED CLEAN
for 7
Figure 1
Flex
Clean
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 2
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 3
STOP
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 4
DISPLAY
Timer
Set/Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
START
Figure 5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 6
Timer
Set/Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 7
Add 1
pad is pressed, 1 minute is
Minute
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
Add 1
Minute