Battery Status Indicator; Front Panel Of The Pmr - Silvercrest PMR-1200 User Manual And Service Information

SilverCrest PMR-1200
There will be no indication on the charging process on the display (3).
When powering the transceiver with optional rechargeable AAA-sized batteries,
they cannot be recharged with the charging cradle. You will need an optional
charger for AAA-sized batteries.
Warning! Do not overcharge the battery!
The charger cradle supplies a constant and continuous charging current.
Therefore you should remove the handheld radio transceiver from the charger
cradle after approx. 12 hours otherwise the battery lifetime may be reduced.

4.7 Battery Status Indicator

When the transceiver is powered on, the battery status indicator (15) will appear on the
display (3) to show the level of the rechargeable battery pack or the inserted batteries.
When the rechargeable battery pack or the inserted batteries are exhausted, an acoustic
signal will be heard.

4.8 Front Panel of the PMR

See the figure on the fold-out cover page.
Send LED indicator
Lights when the PTT button is being pressed and the unit is transmitting.
Antenna
Display
Earphones receptacle (behind protective cover)
Function button
Press to display the setup menu.
Down button
To reduce the sound volume.
To select the previous menu item.
Call button
Speaker
12
Battery fully charged
Battery 2/3 charged
Battery 1/3 charged
Battery empty
Introduction
English