Table of Contents
Advertisement
•
Change view
- You can define how many fields (2, 4, or 6) are shown on the
Trip computer
screen.
•
Reset all
- You can reset all the fields to their original values.
•
Restore defaults
- You can reset the
The values on the
•
Mark position
- You can save your current location as a waypoint. For more
information, see
Saving a waypoint (Mark position)
■ Following a route
On the
Route guidance
on the
Routes
screen or navigate to the waypoint that you have activated using
the
Go to
option of the
The screen shows the following information: course, bearing, next waypoint,
speed, and distance to the next waypoint.
• The blue course arrow indicates the direction where you are heading. The
direction is indicated by N (north), S (south), E (east), and W (west).
The yellow bearing arrow indicates the direction where you should be heading
to reach the next waypoint.
To reach the next waypoint, adjust your direction so that the two arrows point
to the same direction.
If the GPS receiver cannot receive the needed positioning information from
GPS satellites, the
is shown in the middle of the screen.
Trip computer
Trip computer
screen will not be reset.
screen, you can follow the route that you have activated
Mark position
function (available on several screens).
Next:
and
Dist. to next
©
Copyright
2004 Nokia. All rights reserved.
screen to its default view.
on page 14.
fields are empty, and a question mark
17
Advertisement
Table of Contents
