Table of Contents
Advertisement
NAVI™ BARS NAVIGATOR
Settings folder
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
The procedure is the same as performed during the First Time In-
stallation. Please refer to page 15.
Settings folder
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
The procedure is the same as performed during the First Time In-
stallation. Please refer to page 19.
Update channels via a PC
On the Nokia web site (www.nokia.com) you can download a
Windows™ software for updating the channel lists via the serial
port. The serial port connector can be found on the back of the
Mediamaster (See page 10) .
Settings folder
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
From here you can adjust the audio/video settings for your re-
ceiver.
• Press opt to view the TV picture in the background.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
Position of the RGB output
Adjust the horizontal position of the TV picture with cursor left/
cursor right.
Set transparency level
Adjust the transparency level of the graphics in the menus by
using cursor left/cursor right.
Select digital audio format
Select audio format for the digital output. (The upper audio out-
put on the rear of the Mediamaster). AC-3 when the sound is
transmitted in Dolby™ Digital format. PCM for ordinary digital
sound. Please note; When you select AC-3 there will be no sound
output from the analogue audio connections.
GB 28
☛
Antenna
☛
Channel
☛
TV
Advertisement
Table of Contents
