Honda XR250R Owner's Manual page 27

Hide thumbs Also See for XR250R:
Table of Contents

Advertisement

CLUTCH
Clutch adjustment may be required if the
motorcycle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Normal clutch lever free play is 10-20 mm
(3/8 - 3/4 in) at the lever (1). Minor
adjustments can be made with the clutch
cable adjuster (4) at the lever.
(1) Clutch lever
1.
Pull back the rubber dust cover (2). Loosen
the lock nut (3) and turn the adjuster (4).
Tighten the lock nut (3) and check the
adjustment.
2.
If the adjuster is threaded out near its limit
or if the correct free play cannot he
obtained, loosen the lock nut (3) and turn
in the cable adjuster (4) completely.
Tighten the lock nut (3) and pull on the
dust cover.
(2) Dust cover (A) Increase free play
(3) Lock nut
(B) Decrease free play
(4) Clutch cable adjuster
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents