Using Optical Media Drives; Loading Disks - Toshiba 5000 Series User Manual

Using optical media drives

Using optical media drives
The text and illustrations in this section refer primarily to the DVD-ROM drive.
However, operation is the same for the CD-RW/DVD-ROM drive. The full-size
drive provides high-performance execution of CD/DVD-ROM-based programs.
You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor.
An ATAPI interface controller is used for CD/DVD-ROM operation. When the
computer is accessing a CD/DVD-ROM, an LED on the drive glows and the CD-
RW/DVD-ROM and DVD-ROM drive indicator glows.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs section for
precautions on writing to CDs.

Loading disks

To load CD/DVDs, follow the steps below and refer to figures 4-3 to 4-7.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
E
JECT BUTTON
Figure 4-3 Pressing the DVD-ROM eject button
4-3