Mitsubishi Electric XD250U-ST User Manual page 21

Menu operation (continued)
2. INSTALLATION menu
Menu option
OFF/BEIGE
BLUE
WALL SCREEN
/ PINK
BOARD/WHITE BOARD
STANDARD
LAMP MODE
LOW
STANDARD
STANDBY MODE
LOW
AUTO
AUDIO INPUT
AUDIO 1/AUDIO 2/AUDIO 3
MIX
AUTO KEYSTONE ON/OFF
OFF
MIRROR
IMAGE REVERSE
INVERT
MIRROR INVERT
ADVANCED MENU OK
AUTO POWER ON ON/OFF
AUTO POWER OFF OFF/5-60 min
IMAGE CAPTURE GO
SPLASH SCREEN ON/OFF
BACK COLOR BLUE/BLACK/IMAGE
AV MUTE MODE BLACK/IMAGE
LAMP TIME RESET OK
• By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected,
and you cannot switch the LAMP MODE in about one minute after the lamp is on.
• In AUDIO INPUT, HDMI audio is selected when the Input Source is HDMI input. The audio of AUDIO 1, AUDIO 2, AUDIO 3, and MIX
be selected.
Setting
/ LIGHT Selects a desired setting based on the color of the screen or wall
/ LIGHT GREEN on which images are projected. (See page 16.) When selecting a
/BLACK setting other than BLACK BOARD/WHITE BOARD, you can fine-
tune the color tone to the desired level on the 1 to 5 scale.
Select this setting when you want to view images in a well-lit
room.
Select this setting when you want to view images at a moderate
light intensity. The operating sound is consequently reduced, and
the lamp lifetime becomes longer.
• When this mode is switched, projected images may flicker.
• If this mode is frequently switched, the lamp may be deterio-
rated.
LAN can be activated in STANDARD MODE.
Power consumption can be lowered when selecting LOW. How-
ever, LAN and MONITOR OUT cannot be activated.
If AUTO is selected, selects AUDIO 1 when the input source is
COMPUTER 1, selects AUDIO 2 when the input source is COM-
PUTER 2, selects AUDIO 3 when the input source is VIDEO/S-
VIDEO, selects HDMI when the input source is HDMI.
Select the audio input.
Selects MIX signal of AUDIO 1 and AUDIO 2. You can change the
balance of AUDIO 1/AUDIO 2 using MIX
Select Auto Keystone function.
Select this setting when you want to view images from the front
with the projector set on the floor.
Select this setting when you want to view images from behind the
screen with the projector set on the floor.
Select this setting when you want to view images from behind the
screen with the projector set at the ceiling.
Select this setting when you want to view images from the front
with the projector set at the ceiling.
When this mode is set to ON, the lamp is automatically lit when
the power cord is plugged in the wall outlet. Select ON when you
set the projector at the ceiling.
• When the lamp is off, the projector is in standby. Use the
remote control to turn on the lamp.
Selects a desired timer setting until the projector enters the
standby mode when there is no signal input from the source.
Use to capture the screen for the splash screen. (See page 30.)
Select ON to display the splash screen when the projector is pow-
ered on.
Selects the background color that is displayed when there is no
signal input from the source.
Use to choose the background, either BLACK, or IMAGE, which
will be displayed when the AV MUTE button is pressed. When
IMAGE is chosen, the splash screen will be displayed.
Resets LAMP TIME.
Feature description
.
opt.
INSTALLATION
WALL SCREEN BEIGE
STANDARD
LAMP MODE
STANDBY MODE STANDARD
AUDIO INPUT AUTO
AUTO KEYSTONE OFF
IMAGE
OFF
REVERSE
ADVANCED MENU OK
opt.
INSTALLATION
ADVANCED MENU
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
IMAGE CAPTURE GO
SPLASH
ON
ON
SCREEN
BACK COLOR BLUE
BLACK
AV MUTE MODE
LAMP TIME
OK
RESET
INSTALLATION
ADVANCED menu
cannot
EN-21