Correct Usage; Mounting And Dismounting The Cross-Trainer; Biomechanical Guidelines - Life Fitness X1 Base User Manual

3
C U
ORRECT
3.1 M
OUNTING AND DISMOUNTING THE
If mounting from the user right side of the Cross-Trainer, grasp the user right handlebar with the right hand. Place the right foot
on the user right pedal and carefully step over the Cross-Trainer, grasp the user left handlebar with the left hand, and place the
left foot on the user left pedal. If mounting from the user left side, proceed in an opposite fashion. Reverse the process to dis-
mount the Cross-Trainer.
3.2 B
IOMECHANICAL
There are two exercise variations that can be performed on the Cross-Trainer. For each variation, it is important to follow
these general biomechanical guidelines as well as the specific instructions listed below.
G
ENERAL
• Feet should be in a comfortable position facing forward on the pedals so the knees move in a forward plane (not angled
inward or outward) and so the hips do not rotate outward.
• Keep back straight. Do not bend forward at the waist.
• Keep both feet on the pedals at all times.
• If desired, allow heels to slightly lift off the pedals during the motion.
• Do not lock knees during the workout. Keep them slightly bent throughout the motion.
F M – T
ORWARD OTION
• Mount the Cross-Trainer facing forward
• Hands should be positioned comfortably on the moving handles such that the elbow creates a 90 degree angle when the
moving handlebar is rotated toward you
• Choose the desired workout profile and duration on the console
• Begin moving feet in a smooth forward pedaling motion by pushing top foot forward and pulling bottom foot backward
• Exercise at a speed that is comfortable for you
SAGE
C
ROSS
G
UIDELINES
B
OTAL ODY
-T
RAINER
9