Advertisement
•
Do not overfill the kettle. Maximum mark is
indicated on the water gauge.
Do not connect the appliance to a power supply if
•
the power cord, base or kettle itself appears
damaged.
•
Never touch the hot kettle surface, always use the
handle when using it.
•
Ensure the lid is closed when boiling your kettle to
prevent water splashing out and causing injury.
Scalding may occur if the lid is removed during the
brewing cycles.
•
Ensure the kettle and base are placed on a firm,
level surface and cannot fall into water.
•
If the base or connector becomes wet,
disconnect from the power supply and dry the
base and surface underneath with a dry cloth or
tea towel before resuming normal use.
•
After having disconnected the power plug and
after the appliance has cooled down, the
appliance must be cleaned only with a non-
abrasive, slightly dampened cloth, adding a few
drops of neutral, non-aggressive detergent
•
In the event that you decide to dispose of the
appliance, we advise you to make it inoperative
by cutting off the power cord. We also
recommend that any parts that could be
dangerous be rendered harmless, especially for
children, who may play with the appliance or its
parts.
•
Make sure the product is in good condition after
you have removed the packing.
•
Packaging must never be left within the reach of
children since it is potentially dangerous. KEEP
THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PRIOR TO FIRST USE
•
Read all instructions carefully before use.
•
Before using your kettle ensure the voltage of your
electricity supply is the same as stated on the
rating plate on your kettle.
•
Before normal use of your kettle, fill with water to
the Maximum mark on the water gauge and boil.
Do this three times ， to remove manufacturing
dust，etc.
Advertisement
