Canon MX720 Series Online Manual page 176

• When you select Portrait for the orientation and Short-side stapling for the stapling side:
• When you select Landscp. for the orientation and Long-side stapling for the stapling side:
• When you select Landscp. for the orientation and Short-side stapling for the stapling side:
After selecting the stapling side and press the OK button, you can select whether you use the preview
screen. If you select ON, the preview screen is displayed so that you can check the orientation.
Note
If Device memory is full. Cannot continue process. appears on the LCD when scanning, set
the print quality to Standard, then try copying again. If the problem is not resolved, set the print
quality to Fast and try copying again.
Two-sided copy setting can be used in combination with 2-on-1 copy or 4-on-1 copy when
Standard copy is selected. In addition, two-sided copy is also available when ON is selected for
Collate.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
Collated Copying
If you are copying in black & white, print intensity of the Two-sided copy may differ from that of a
single-sided copy.
When Loading the Original on the platen glass:
• Before scanning:
When you select 2-sided for 2-sidedPrintSetting and the preview function is activated, the
machine starts pre-scanning before scanning the original. When pre-scanning is finished, the
screen below (preview screen) is displayed on the LCD.
1. Rotate
If you press the right Function button, the original rotates by 180 degrees.