Canon MX720 Series Online Manual page 170

Note
Depending on the copy menu, some setting items cannot be selected. This section describes
the setting items in Standard copy.
The setting item which cannot be selected is displayed grayed out.
For details on the setting items for Photo copy, see
Some settings cannot be specified in combination with the setting of other setting item or the
copy menu. If the setting which cannot be specified in combination is selected, Error details is
displayed on the LCD. In this case, press the left Function button to confirm the message, then
change the setting.
The settings of the page size, media type, etc. are retained even if the machine is turned off.
When copying starts in the copy menu that is not available with the specified setting, The
specified function is not available with current settings. is displayed on the LCD. Change the
setting, following the on-screen instructions.
1. Magnif. (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2. Intensity
Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to
the originals loaded on the platen glass. Auto is displayed on the Copy standby screen.
Note
When Auto is selected, load the original on the platen glass.
Copying Photos.