Operator Recoverable Errors - Oce 7055 User Manual

Copier/printer
Hide thumbs Also See for 7055:
Table of Contents

Advertisement

Operator recoverable errors

When the copier detects an error, the copier stops immediately. The paper path
indicator will lit and the length display shows an error code. The following
explains the general procedure in case of an operator recoverable error
General procedure for operator recoverable errors
Remove the original.
1
Open the manual copy material feed table.
2
Remove the copy material.
3
Check the paper path.
4
Close the manual copy material feed table.
5
The following table gives an overview of possible causes and specific actions.
Error messages
Message
E0
E1
E2
E3
E4
E5
Solving problems
Possible causes
Copy material is removed dur-
ing the copy process.
Stop button has been pressed
during a copy process.
Original feed problem.
Paper feed table is open.
Copy material is too short
Initialisation error
Paper feed timing error
Knife cut timing error.
Automatic copy material drawer
or flap opened during operation
Out of paper
Specific actions
Contact the key operator.
Close paper feed table.
Contact the key operator.
1 Cut the paper manually with
a cutter.
2 Contact the key operator
1 Close the drawer
2 Contact the service operator
1 Insert a new paper roll.
2 check the paper path
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7056

Table of Contents