Assembly - Billy Goat OS901SPS Owner's Manual

OS901SP Owner's Manual

ASSEMBLY

1. UNFOLD the upper handle and slide handle lock loops (item 35) into place to secure the upper handle to the
lower.
2. ATTACH the bar of the foot pedal to the bracket located on the engine. Use the lock nut (93) from the parts bag.
3. ATTACH the pedal section to the rear of the frame between the two brackets by aligning the holes and inserting
the tube (201) from the parts bag.
4. Tap the two pins (202) into both ends of the tube installed in step 3, and using pliers, spread the cotter pins to
keep it from coming out.
5. CHECK engine oil level and fill to proper level with engine manufacturers recommended grade of oil. Make sure
to adjust the machine so that the engine is level during checking. See engine manufacturers' instruction manual.
6. CONNECT spark plug wire.
93
202
201
Part No 351520 Form No F022513A
6