3.8 Turning On Your Computer
Once you have connected your AC adapter or charged the battery pack,
you can power on your iQ150.
When you power on your iQ150, the Power-On Self Test (POST) runs
automatically to check the internal hardware and configuration. After the
POST is completed, your iQ150 loads the installed operating system.
If hardware configuration has been changed or the POST fails, a warning
message may appear on the screen. This message will inform you of any
errors or invalid settings, and prompt you to run the BIOS Setup Utility to
correct the problem.
3.9 Switching the Power Off
1. Make sure all applications are turned off.
2. Press the ON/OFF button for Stand-by.
3. To completely switch off the WOW! 150, shut down him down from the
Windows start menu.
Never turn the iQ150 off during the POST, or an unrecoverable error
Never turn the iQ150 off while the hard disk is in use, or system data
may be lost or corrupted.