LEANING IS THE ONLY MAINTENANCE
quired. It must be carried out with the micro-
wave oven disconnected.
AILURE TO MAINTAIN THE OVEN
could lead to deterioration of the surface that
could adversely aff ect the life of the appliance
and possibly result in a hazardous situation.
O NOT USE METAL SCOURING PADS
wool pads, gritty wash-
cloths, etc. which can
damage the control pan-
el, and the interior and exterior oven sur-
faces. Use a cloth with a mild detergent
or a paper towel with spray glass cleaner.
Apply spray glass cleaner to a paper towel.
directly on the oven.
O NOT SPRAY
T REGULAR INTERVALS
if spill overs have occurred, re-
move the turntable, the turnta-
ble support and wipe the base of
the oven clean.
to operate with the turnta-
HIS OVEN IS DESIGNED
ble in place.
operate the microwave oven when
the turntable has been removed for cleaning.
SE A SOFT AND DAMP CLOTH
gent to clean the interior surfaces, front and
rear of the door and the door opening.
or food particles to
O NOT ALLOW GREASE
build up around the door.
, boil a cup of water in the oven
OR STUBBORN STAINS
for 2 or 3 minutes. Steam will soften the marks.
to a cup of water, plac-
DDING SOME LEMON JUICE
ing this on the turntable and boiling for a few
minutes can eliminate odors inside the oven.
O NOT USE STEAM CLEANING APPLIANCES
cleaning your microwave oven.
should be cleaned regularly and
any food deposits removed.
does not need cleaning since
the intense heat will burn off any splashes, but
the ceiling beneath it may need regular clean-
ing. This should be done with a soft and damp
cloth with mild detergent.
RILL IS NOT USED REGULARLY
run for 10 minutes a month to burn off any
splashes, in order to reduce the risk of fire.
MAINTENANCE & CLEANING
in a clean condition
with mild deter-
tergent water. Heavily soiled areas can be
cleaned with a scouring cloth
and a mild cleanser.
cool off before cleaning.
, it should be
should be cleaned in mild, de-
let the crisp-plate
immerse or rinse with water while
the crisp-plate is hot. Quick cooling may
O NOT USE STEEL
. This will scratch