First Steps
4.8.2. Scratch mode:
When this option is activated (a little check mark
can be seen in front of the entry), upon clicking
the same button again the sample will not be
stopped, but restarted. With this function a sample
can for example be played repeatedly to the beat
of the title.
The volume of the sample player can be adjusted
at the two [VOLUME] controls. Also the speed of
the sample player, (Pitch) can be manipulated:
4.8.3. Configuring the Sample Player:
BPM Studio supports output of the different
devices, through different sound card channels.
If not enough channels are available though the
sample player can share the two output channels
of player A and B. In Program Options, register
tab Audio I/O, simply the same channel as for
player A, is entered for the sample player. When
using BPM Studio, the assignment keys
und
are used to select if the output is
combined with that of player A or B. Please be
aware that shifting the title takes a couple of
seconds. This will also be indicated by the sampler
LED, when turns green again, the sampler is
ready.
Need help?
Do you have a question about the BPM STUDIO 4 PRO and is the answer not in the manual?