Voice Mail System; To Listen To Your Voice Mail Messages From The Base Unit In Idle Mode; To Listen To Your Voice Mail Messages From The Handset In Idle Mode - RCA 25212 User Manual

Voice Mail System

Provided your phone company offers voice messaging service and you
subscribe to it, the NEW MSG indicator on the base and the Visual Indicator
on the top of the handset flashes to indicate a message is waiting. The
screen displays "L1 MSG
line has voice mail waiting. If both lines have new voice mail messages, the
display shows "L1 MSG Waiting" & "L2 MSG Waiting" alternately.
flashing after the message is reviewed.
NOTE: To deactivate the New Message indicator;
during the BS display shows "Lx MSG Waiting", then the indicator will be off.
IMPORTANT: You must have the voice mail access code
programmed for this feature to work. See the "Programming
the Voice mail numbers" section. If there is no voice mail
number stored, the system will emit an error tone.

To listen to your voice mail messages from the base unit in idle mode.

1. Press VOICE MAIL 1 for line 1 voicemail or VOICE MAIL 2 for line 2
voicemail.
2. The base unit activates the speaker with the corresponding line and
auto dials the pre-programmed voice mail access number/code to
access the voice mail stored at the phone company.
3. Once the phone company voice mail system answers the call, additional
digits such as a pin code may be dialed.
4. The screen displays

To listen to your voice mail messages from the handset in idle mode.

1. Press VM soft key.
2. The screen displays "VOICE MAIL: SELECT LINE". Press the
access line 1 voice mail and
3. The handset activates the receiver with the corresponding line and auto
dials the pre-programmed voice mail access number/code to access the
voice mail stored at the phone company.
4. Once the phone company voice mail system answers the call, additional
digits such as a pin code may be dialed.
5. The screen displays
Waiting" or "L2 MSG
"the dialed numbers" and the call timer.
Line2 softkey
"the dialed numbers" and the call timer.
Voice Mail System
Waiting" to indicate which
Press the Delete button once
Line1 softkey
to access line 1 voice mail.
It stops
to
33