Table of Contents
Advertisement
Installation
Installation precautions
• Always install the system on a level, stable surface. When installing on a stand or tabletop, be sure to confi rm the strength of
the stand.
• The magnetism from the speakers may cause color irregularities on a nearby TV or PC screen. Always install the speakers at a
distance from a TV or PC.
CAUTION
Observe the following cautions when installing the system. Insuffi cient heat radiation may build up internal heat and
cause a malfunction or fi re hazard.
• Do not place an object that may hinder heat radiation on the system.
• Do not install the system on the back, on the side or upside down.
• Do not place a cloth on the system or place it on a carpet or cushion.
• Do not use the system in a poorly ventilated place.
• Leave the spaces specifi ed below around the cabinets of the main unit.
Top: 50 cm or more Side: 10 cm or more Rear: 10 cm or more
Install the system so that the power outlet is easily accessible from the user, and unplug the power cord from the
power outlet immediately in case of a trouble.
Note that the power supply to the system is not shut down completely by simply setting the power button to OFF.
To shut down the power supply completely, it is required to unplug the power cord.
If the system does not function properly or the display shows erroneous information
Malfunction of the system
even when the connections are made correctly, reset the system (page 47).
K-525
8
Connections
Basic connections
Do not plug the power cord into the power outlet until all other connections are
Caution for connection
completed. Before unplugging a connected cord or cable, be sure to switch the system
OFF and unplug the power cord from the power outlet in advance.
Connecting the FM indoor antenna
The provided FM antenna is a simplifi ed one for indoor use. To receive FM stations stably, it is recommended to use an
outdoor antenna (commercially available). Remove the simplifi ed antenna before connecting the outdoor antenna.
Caution for outdoor antenna installation
FM indoor antenna
1 Connect to the [FM75Ω] terminal.
2 Find the antenna location that off ers
best reception.
3 Fix the antenna in the found location.
To AC wall outlet
• Insert the plug firmly all the way
into the AC wall outlet.
Power cord
Two types of power cords are provided.
Select the one designed for the country
in which this unit is used.
Since antenna installation necessitates skill and experience, always
consult your dealer before installation. The antenna should be
placed at a distance from the power distribution wires. Otherwise, an
electric shock accident may occur if the antenna falls down.
9
English
Advertisement
Table of Contents
