MAC / IP / Port filtering
Default Policy: Set how to handle the packet if none of the rules match.
MAC address: Set the MAC address to be filtered.
Destination IP Address: Set the destination IP address to be filtered.
Source IP Address: Set the source IP address to be filtered.
Protocol: Set which protocol to be used for filtering.
Destination Port Range: Set the destination port numbers to be filtered
Source Port Range: Set the source port numbers to be filtered.
Action: Set how to handle the detected packet.
Note:Filtering rules are matched one by one, if a provision is met it will not
continue to match against the other rules set.
Port Forwarding Settings
You can set up virtual servers to provide internet services. Select Firewall >
Port Forwarding > Enable to configure the Virtual Server Settings.
IP Address: Set the IP address for the virtual server.
Port Range: Set the port numbers for the virtual server.
Protocol: Set the protocol for the virtual server.
Advanced Settings
Status
Management
Restore
PIN
Management
Router
View your device firmware and IMEI information
Set the Administrator password, default is 'admin'
Press to restore device to factory defaults
Set or change your SIM PIN status
Set the IP address range and DHCP settings for your
router
13
Need help?
Do you have a question about the Mini WiFi Modem and is the answer not in the manual?
Questions and answers