Call; Receive - Hitachi WIRELESSIP5000 User Manual

User's Manual

2.3. Call

Inputting the telephone number and making a call
If a set telephone number is shown on the display, you can make a call.
1
Note! If the telephone number is not set correctly, "NotRegister" or
"Network Fail" is displayed.
Input the telephone number, then press the Send key.
2
If you succeed in placing the call, you can hear the ringer at the other end.
When the other party answers, a screen like that in the figure on the right is
3
displayed, so during the call you can check the call duration.

2.4. Receive

Receiving a call.
If a set telephone number is displayed on the screen, you can receive a call.
1
Note! If the telephone number is not set correctly, "NotRegister" or
"Network Fail" is displayed.
Hitachi Cable 6