Extron electronics FOX USB Tx (SM) User Manual page 3

FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference; the user must correct the interference at his own expense.
NOTE:
Conventions Used in this Guide
Notifications
WARNING:
ATTENTION: Attention indicates a situation that may damage or destroy the product or
NOTE:
Copyright
© 2012 Extron Electronics. All rights reserved.
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
This unit was tested with shielded I/O cables on the peripheral devices. Shielded
cables must be used to ensure compliance with FCC emissions limits.
For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the
and Regulatory Compliance
the following are used:
A warning indicates a situation that has the potential to result in death or
severe injury.
associated equipment.
A note draws attention to important information.
Guide" on the Extron website.
"Extron Safety