Download  Print this page

Mitsubishi Electric TN810 ATX User Manual Page 8

Celeron processor-based atx profile motherboard..
Hide thumbs

Advertisement

                       

 
TN810 ATX is a Celeron™ processor-based ATX profile motherboard.
The design of TN810 ATX is based around the following components.

Intel Celeron™ processor in Socket 370

Intel 810 Chipset consisting of :-

Graphics and Memory Controller Hub (GMCH)

I/O Controller Hub (ICH)

Firmware Hub (FWH)

AC'97 audio controller

Intel 82559 IEE802.3 10BASE-T / 100BASE-TX compatible LAN controller
The Celeron™ processor is based on the P6 micro-architecture and includes MMX technology.
Two package styles are available – cartridge (slot 1) and pin-grid array (socket 370). TN810
requires the pin-grid array version.
The GMCH connects the processor to the main system memory and other system logic. It has an
integrated graphics controller with optional 4MB Display Cache. Supports both 66Mhz and
100Mhz system bus.
The ICH contains a PCI 2.2 interface, a bus master IDE controller - Ultra ATA 33/66, AC'97
2.1 interface and all the general purpose I/O ports.
The AC'97 CODEC is the analogue part of the audio system. It is connected to the ICH by a
digital link.
The 82559 is Intel's second generation integrated 10BASE-T/100BASE-TX LAN solution. It
consists of both the Media Access Controller (MAC) and the physical layer (PHY) interface
combined into a single component solution. It contains a 32 bit PCI bus master interface
MITSUBISHI ELECTRIC MOTHERBOARD DIVISION
         
PAGE 8 OF 46

Advertisement

   Related Manuals for Mitsubishi Electric TN810 ATX

Comments to this Manuals

Symbols: 0
Latest comments: