Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for GE Interlogix Aritech CS250
Summary of Contents for GE Interlogix Aritech CS250
- Page 1 GE Interlogix CS250 LCD Keypad User Manual May 2004 Version 1.7...
- Page 2 Aritech is a GE Interlogix brand. www.aritech.com Copyright © 2004 GE Interlogix B.V.. All rights reserved. GE Interlogix B.V. grants the right to reprint this manual for internal use only. GE Interlogix B.V. reserves the right to change information without notice.
-
Page 3: Table Of Contents
Setting the keypad audio level ............27 Duress arm/disarm ................. 16 Enabling and disabling the backlight ..........27 Resetting fire detectors ..............17 Glossary ..................28 Changing user codes ..............18 Service messages ................29 Viewing user attributes ..............19 EN50131-1 ..................31 CS250 User Manual... - Page 4 ENU MAP The CS250 main menu is shown below. Once you enter a user code you can scroll through the main menu and press the OK button to access the sub-menus. Some options are only visible if you have the correct attributes or have entered a super user code.
- Page 5 Quick Partarm 2 Function Key3 Quick Force Arm Reset Fire Quick Force PG 1 Quick Force PG 2 Date Stop Call Time/Date Fire Reset Time Medical Alert Start Ud Fire Alarm Inhibit Zone Exit Menu Voice Phone Num CS250 User Manual...
-
Page 6: Lcd Keypad
OK: Press this key to complete a step. NO: Press this key to cancel a Hash key: Press this key before task or step back in a menu. and between parts of a task. CS250 User Manual... - Page 7 NO: Cancels a command before the OK key is pressed. It is also used The installer can program the system so that the LCD displays to clear the display. whether it the system is armed or disarmed. CS250 User Manual...
-
Page 8: Using Keyfobs
RF keyfob If you have an RF receiver with your CS250 system, you can use an RF keyfob. There are 2 types of keyfob, one with 2 buttons and one with 4 buttons. The buttons can be programmed to perform different functions. -
Page 9: Turning On The Alarm System
Enter the user code... Enter Code User Menu **** Arm Options Press OK..................Full Arm Press OK. The buzzer sounds and the system begins to arm..Arming..# Area 1 Arming Leave the building............... Leave Now CS250 User Manual... -
Page 10: Disarming The System
This disarms the system if no alarm events have taken place. Enter Code User Menu Enter the user code... **** Disarm Options Disarm Press OK..................Full Disarm Thu 22 Jan 09:31 Press OK. The system disarms........... Area 1 Disarmed CS250 User Manual... -
Page 11: Turning Off The System After An Alarm
Zone 7 Area 1 and location. Press 0 to see the second screen..........001 Act 07 0 A1 Fri 01 Jan 18:24 Fri 01 Jan 18:30 Press NO. The panel returns to normal........Area 1 Disarmed CS250 User Manual... -
Page 12: Inhibiting (Excluding) One Or More Zones
Inhibiting zones should never be a regular procedure. It is provided to ensure that as much of your premises as possible can be protected during temporary fault conditions. Contact your installer so that the fault can be corrected. CS250 User Manual... -
Page 13: Inhibiting Tampered Zones
Press the down arrow..............Inhibit Zon Tam Inhibit Zon Tam Press OK. Any inhibited zones are displayed......None Inhibit Zon Tam Enter the zone number that you want to inhibit followed by #. 1 Zone 1 CS250 User Manual... -
Page 14: Inhibiting A System Tamper
Enter the code for the system tamper that you want RF Jam Tamp 2 Inhibit Sys Tam to inhibit followed by #. The inhibit is displayed. In this Internal Bell RF Ant Tamp 1 example, the internal bell tamper is inhibited......CS250 User Manual... -
Page 15: Life Safety Functions
Press the 4 and 6 keys simultaneously. Medical Alert Personal Attack Press the 7 and 9 keys simultaneously. Tues 28 Feb 15:17 Alarm These keys must be enabled by the installer. A message can be sent only if a communicator is installed. CS250 User Manual... -
Page 16: Duress Arm/Disarm
If a communicator is installed, a message is sent to the ARC. Enter Code Enter the duress code..............**** Thu 12 Feb 10:12 The system disarms and immediately reports Area 1 Disarmed a duress alarm to the ARC, if a communicator is installed..CS250 User Manual... -
Page 17: Resetting Fire Detectors
System Settings Press OK..................Function Keys System Settings Press the down arrow..............Reset Fire Press OK. The keypad beeps to indicate an update. It can be useful to set this up as a function key. CS250 User Manual... -
Page 18: Changing User Codes
OK............User Detail 1 Press OK..................User Detail 1 **** Enter the new user code and press OK........Confirm Code **** Enter the code again and press OK..........CS250 User Manual... -
Page 19: Viewing User Attributes
CC: Change Code Press the down arrow 6 times........... PU1: Disarm 1 PARTAR FS IN PS1 PS2 PU2: Disarm 2 PARTAR FU CC PU1 PU2 SU SU: Super User Press OK..................The selected user’s attributes are displayed. CS250 User Manual... -
Page 20: Setting Up A Time Limited User Code
Press the down arrow once............Users 255h Press OK..................Users 255h Press OK..................Users 001h Enter the length of time, in hours, that the code is valid..... Users Update Success Press OK..................CS250 User Manual... -
Page 21: Deleting User Codes
OK............New Code Press OK without entering a new code........User Detail 1 **** Press OK without confirming a new code........Confirm Code **** Press OK..................Confirm Code Update Success CS250 User Manual... -
Page 22: Viewing Open Zones
This shows which zones are inhibited and therefore not protected. Press the up arrow twice. Any inhibited zones are displayed Fri 11 Jan on the panel. In this example, zone 1 is open......Aritech CS245 Inhibit Zone Zone 1 CS250 User Manual... -
Page 23: Viewing System Faults
Pressing any key stops the buzzer. If line fault occurs, while the system is disarmed, the power LED does not flash but the keypad buzzer may sound for 30 seconds. Pressing any key stops the buzzer. Select Diagnostics>System Status to check the system state and determine the cause of the fault. CS250 User Manual... -
Page 24: Performing A Bell Test
Press OK..................Zone Tests Diagnostics Press the down arrow 5 times............ Ext Bell Test Ext Bell Test Press OK. The bell sounds for 3 seconds on and 1 second off, until you press NO..............CS250 User Manual... -
Page 25: Reading The Event Log
Zone, user or event type number with associated data on the event - see the CS250 Installation Manual for more details. Part arm status. 0 =Not a part arm event. 1 = Part arm 1 is Burglary A active. -
Page 26: Setting The System Time And Date
Press OK to set the date. Press the Time/Date down arrow and OK to set the time..........Date Time/Date Time/Date Press OK and enter the time or date..... 12/12/2002 18:24 Time/Date Press OK..................12/12/2002 Time/Date Update Success CS250 User Manual... -
Page 27: Setting The Keypad Audio Level
Press the 3 and # keys simultaneously for 2 seconds to disable the backlighting. Press the 4 and # keys simultaneously for 2 seconds to enable the backlighting. The confirmation beep sounds and the backighting is turned on or off. CS250 User Manual... -
Page 28: Glossary
Inhibited zone Zones that are left open when the rest of Zone An area guarded by a group of one or the system is armed. They can be entered more detection devices. without triggering an alarm. CS250 User Manual... -
Page 29: Service Messages
The telephone line is faulty or is not connected properly. Ensure the line is connected and there is no problem with the service provider. Local Tamp There has been interference with the control panel casing. Check the casing. If there is no damage, close it securely. CS250 User Manual... - Page 30 If the condition is persistent, contact the installer. ROM Error The control panel memory is not working properly. Contact the installer. Sensor Main Req The fire detector is dirty. Contact the installer to clean the fire detector. CS250 User Manual...
-
Page 31: En50131-1
Turn EN50131-1 on by entering the super user code and selecting User Menu - Users - Installr Access - Limit Access - Yes. Turn EN50131-1 off by entering the super user code and selecting User Menu - Users - Installr Access - Limit Access - No. CS250 User Manual... - Page 32 1048427...