Tone Settings - Nokia 3300 User Manual

Tone settings

Press Menu, and select
settings in the
settings you make, change the settings in the active profile.
Select
voice call. The options are Ringing, Ascending,
Select
• To select ringing tones that have been saved in the Gallery, select
from the ringing tone list.
• To select ringing tones that have been saved in the memory card, select
memory card
Select
The vibrating alert does not work when the phone is connected to a charger, a
desktop stand, or a car kit.
Select
tones, or
battery is running out of power.
Select
belong to a selected caller group. Scroll to the caller group you want or
and press Mark.
98
Settings
Profiles menu, see
Incoming call alert to select how the phone notifies you of an incoming
Ringing tone for incoming voice calls.
from the ringing tone list.
Ringing volume and Vibrating alert
Tip: If you receive a ringing tone via OTA or by downloading, you can save
the ringing tone in the
Message alert tone to set the alert tone for the incoming messages,
Warning tones to set the phone to sound tones for example, when the
Alert for to set the phone to ring only upon calls from phone numbers that
Copyright © 2004 Nokia. All rights reserved.
and then Tone settings. You can find the same
"Profiles (Menu 4)"
Ring once,
for incoming voice calls and messages.
Gallery or the memory card in your phone.
on page 87. Note that the
Beep once and Off.
Open gallery
Keypad
All calls
View