Switch Panel Assembly Replacement - KitchenAid KFP710 Service Manual
Hide thumbs
Also See for KFP710:
- Instructions and recipes manual (83 pages) ,
- Instructions and recipes manual (80 pages) ,
- Instructions and recipes manual (83 pages)
Table of Contents
Advertisement
SWITCH PANEL ASSEMBLY REPLACEMENT
- 7 CUP FOOD PROCESSORS -
To replace the switch panel assembly for the 7 cup food
processor:
1.
Unplug the power cord and remove the housing base.
2.
Remove the switch assembly following the Switch
Assembly & Neon Lamp Replacement procedure.
3.
Using a T10 torx driver, remove the two (2) M3X8 screws
securing the switch panel assembly to the motor housing.
4.
Remove the switch panel assembly from the motor
housing. The switch panel assembly consists of the switch
panel overlay, switch panel bezel, and switch panel seal.
5.
Replace the switch panel assembly in the reverse order
making sure the switch panel seal is fully seated to the
switch panel bezel and the assembly is seated against the
motor housing.
15
Hide quick links:
Advertisement
Table of Contents
