Enclosure & Ventilation Requirements; Bios Factory Defaults (All Chassis) - Dell OptiPlex 320 Tech Specs

Dell™ OptiPlex™ 320
Tech Specs
ENCLOSURE & VENTILATION REQUIREMENTS
Enclosure Ventilation
Enclosure Minimum Clearance
Recommended Enclosure
Open Desk Minimum Clearance
STANDARDS

BIOS Factory Defaults (All Chassis)

BIOS address F0000h
BIOS chip (NVRAM) 4 Mb
Setup Option Default Factory Value
PATA drives On
SATA drives On
Floppy Internal
Onboard Video Auto
EIST Off
Onboard Video buffer 8MB
Primary Video Add-in
Suspend mode S3
Chassis intrusion On
SERR On
Smart drive error report Off
MINITOWER
If your enclosure has doors, they need to be of a type that allows at
least 30% airflow through the enclosure (front and back).
Leave a 10.2 cm (4 in.) minimum clearance on all vented sides of the
computer to permit the airflow required for proper ventilation.
Do not install your computer in an enclosure that does not allow airflow.
This restricts the airflow and impacts your computer's performance,
possibly causing it to overheat.
If your computer is installed in a corner, on a desk, or under a desk,
leave at least 5.1 cm (2 in.) clearance from the back of the computer
to the wall to permit the airflow required for proper ventilation.
TCO99, Blue Angel, Green PC, Energy Star, BSMI, C-TICK, CE, FCC, IRAM, NEMKO, NFPA99, SABS, SASO, TCO,
TUV, UL, VCCI, USB 2.0, WEEE
USB front panel On
Module bay On
Comm Port Auto
Parallel Port mode PS/2
Parallel Port address 378
Wake on LAN Off
Limit CPUID Off
HD Acoustic mode Bypass
HD Password Disabled
Hyper-threading On
Auto Power on Off
Auto Power time 12:00am
PS2 Mouse On
DESKTOP
Low power mode Off (except Energy Star)
Password Disabled
POST hot keys Setup & Boot Menu
Keyboard Num lock Report
Keyboard error report On
Onboard USB On
Fast Boot On
Onboard Audio On
Onboard Modem On
Flex bay On (no boot)
Execute Disable On
Onboard NIC On (without PXE)
A/C recovery Off