Use a point size 0 Phillips screwdriver.
6. Slide your fingernail or a thin object under the cover and lift it off.
1. Memory module cover
7. Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot at about a 30 degree angle before
holding it down until the latches on either side snap into place.
1. Slot A
User's Manual
2
1
Figure 3-4 Removing the memory module cover
2
Figure 3-5 Seating the memory module-1
2. Screw
1
2. Slot B
Hardware, Utilities and Options
3-17