Listen To Radio; Tune To A Radio Station; Program Radio Stations - Philips AJ7050D User Manual

5 Listen to radio

Note
•
Only FM radio reception is available on this unit.

Tune to a radio station

Tip
•
For optimal reception, fully extend and adjust the
position of the FM antenna.
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
[STEREO] is the default setting for tuner mode.
•
In tuner mode, you can press OK/
between [STEREO] and [MONO], and the unit
memorizes your setting even if you turn off the unit or
turn to other sources.
1
Press SOURCE repeatedly to select FM
mode.
2
Press and hold TUNE+/TUNE- for more
than 2 seconds.
» The radio tunes to next station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
TUNE+/TUNE- repeatedly until you
find optimal reception.

Program radio stations

Radio station preset allows you to save radio
stations, and quickly tune to a favorite station.
•
•
•
Program radio stations manually
1. Press SOURCE repeatedly to enter the FM
mode.
2. Press TUNE+/TUNE- to tune to a radio
station.
3. Press PROG/SCAN.
to toggle
4. Press OK to save current radio station to the
selected position.
•
Program radio stations automatically
1
2
3
Select a preset radio station
1
Note
The preset list can store up to 20 stations.
If the preset list is fully occupied, the screen will show
[FULL] (full).
When you save a radio station to a position that has
already been occupied, the original radio station will
be replaced.
» A position number flashes.
Tip
Press PRESET +/PRESET - to change the position to
save a radio station.
Press SOURCE repeatedly to enter the
FM mode.
Press and hold PROG/SCAN.
» The screen displays [AUTO] (auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
Wait until the auto scan finishes.
» The first station in the preset list
broadcasts automatically.
Press / to select a preset number.
EN 11