The Systemunit Settings - Cisco Telepresence MX300 Administrator's Manual

Cisco TelePresence MX Series
AdministrAtor guide
Table of contents Introduction
The SystemUnit settings
SystemUnit Name
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured
on the system then this ID will be used instead of the system name. The system name will be
displayed:
1) When the codec is acting as an SNMP Agent.
2) Towards a DHCP server.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: SystemUnit Name: "Meeting Room"
SystemUnit MenuLanguage
Select the language to be used in the menus on screen.
Requires user role: USER
Value space: <English/ChineseSimplified/Finnish/French/German/Japanese/
Russian/Swedish>
Example: SystemUnit MenuLanguage: English
SystemUnit ContactInfo Type
Not applicable in this version.
SystemUnit Type
Select whether the video system is for personal use or to be used in a multiuser environment. It
is highly recommended not to use the default setting.
Requires user role: ADMIN
Value space: <Personal/Shared>
Personal: Set to Personal when the system is for personal use.
Shared: Set to Shared when the system is used in a multiuser environment.
Example: SystemUnit Type: Personal
D14850.02 MX Series Administrator Guide (TC5.0) | 2011 NOVEMBER | © 2011 Cisco Systems, Inc. All rights reserved.
Web interface Advanced settings Advanced settings Appendices
SystemUnit CallLogging Mode
Set the call logging mode for calls that are received or placed by the system. The call logs may
then be viewed via the web interface or using the xHistory command.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable logging.
Off: Disable logging.
Example: SystemUnit CallLogging Mode: On
SystemUnit IrSensor
Not applicable in this version.
55
www.cisco.com