Related Manuals for Sima XL-72 Theater
Summary of Contents for Sima XL-72 Theater
- Page 1 Sima XL-72 Theater Inflatable Indoor/Outdoor Projection Screen ® w w w . s i m a p r o d u c t s . c o m ®...
-
Page 2: Table Of Contents
Table of Contents TABLE OF CONTENTS..............................2 INTRODUCTION................................3 LIST OF MATERIALS................................4 SELECTING A SETUP SITE...............................4 UNPACKING THE SCREEN...............................5 INFLATING THE SCREEN............................5,6,7 SCREEN INSTALLATION WITH VELCRO PATCHES....................8 SETTING UP THE INFLATABLE HOME THEATER FOR FRONT AND REAR PROJECTION......9 SECURING THE SCREEN AND FILLING WATER BALLASTS.................10 SCREEN DEFLATION &... -
Page 3: Introduction
• Clean only with mild soap and water. Do not use harsh chemicals. Sima Products has researched all regulations regarding the use of this XL-72 Theater. We have not found any regulations related to the use of our screen; however we will not be responsible if some other regula- tions apply to this product in the country you intend to operate the system. -
Page 4: List Of Materials
List of Materials: Your package should include the following materials: Inflatable Frame 72” White PVC Screen 16” Extra set of detachable pontoons 1 Air pump (inflator / deflator) Part # 52472 Select A Setup Site • Select a site that has the necessary height clearance for the screen and enough room for your projector to properly focus and size the projected image. -
Page 5: Unpacking The Screen
Unpacking the Screen 1. Remove all the items from box. Don’t cut the boxes too deep, as this may damage the screen. (FIG 1) FIG 1 Inflating the screen 1. Remove the frame from the package. Unroll the screen as shown at right. Be sure both bases are facing the correct way. - Page 6 • Never look into or point the inflate port toward your eyes while pump is operating. • The power supply cord cannot be replaced. If the cord is damaged, contact Sima customer Service for a replacement pump. • Keep away from children •...
- Page 7 “topping off” the frame with air prior to use. • It is recommended to keep the supplied air pump on hand to add additional air when using the XL-72 Theater during an all day event. • Be sure to deflate frame and store after usage.
-
Page 8: Screen Installation With Velcro Patches
Screen Installation Velcro patches are located at each corner and around the perimeter of the screen frame. The screen also has a series of Velcro patches for easy attachment. Starting with a top corner attach the screen using the Velcro patches. Continue to attach the screen across the top of the (inflated) frame, pulling it taut. -
Page 9: Setting Up The Inflatable Home Theater For Front And Rear Projection
Setting up the Inflatable Home Theater for Front and Rear Projection Projector Angle Projector Distance • Attempt to position • Typically, set up the projector a distance the projector so that it is (1x – 1.5x) the diagonal from the screen. parallel to the inflatable screen. -
Page 10: Securing The Screen And Filling Water Ballasts
Securing the screen and filling the water ballasts Inflate the spare set of pontoons using the include pump. The spare pontoons contain water ballasts to weight and secure the inflated screen. Locate the clear plastic water intake cap. (Note: the air intake valve has a black threaded cap, the water intake is clear plastic) (FIG. -
Page 11: Screen Deflation & Repacking
Screen Deflation and Repacking It is recommended to remove the screen from the frame before packing to prevent damage and creases in the screen. 1. When storing, remove the screen prior to deflating the frame, fold and roll it back onto the tube for storage. -
Page 12: Troubleshooting Guide
Troubleshooting Guide PROBLEM SOLUTION Wrinkles & Creases in the screen 1. Remove the screen prior to deflating and roll it back up for storage. Note: Some wrinkles are normal and will not affect the viewing image. 2. Setup the screen and frame in a warm environment (Sunlight) to remove the wrinkles from the screen. -
Page 13: Specifications Sheet
Specifications sheet Inflatable Frame Descriptions • Inflates in under 5 minutes with pump • Velcro attachment areas Standard Screen Descriptions • 16’x9’ HD Wide screen, 4x3 format compatible • Compatible with all types of projectors • Front and rear projection capable •... -
Page 14: Consumer Warranty And Defective Return Policy
Limitation of Liability and Remedies Sima shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other incidental, consequential, special or punitive damages arising from the use of, or the inability to use, this product, whether arising out of contract, negligence, tort or under any warranty, even if Sima has been advised of the possibility of such damages.
Need help?
Do you have a question about the XL-72 Theater and is the answer not in the manual?
Questions and answers