Advertisement
3. If the toe button is in the off position when you call up the next
program, you will need to turn the toe switch back on for effect.
4. To edit the effect of the Expression Pedal, please push the Pedal button
located on the editing control panel (to the left of the pedal).
Phrase Trainer
1. Press the phrase trainer edit button
2. Choose aux in for external audio, (first data knob "GAIN").
3. Audio signal will pass through.
4. Press the FX SELECT button to begin recording, if less than 8 seconds
press the same button and your music will now loop, otherwise it will
start looping automatically when 8 seconds is reached.
5. Slow down the track by using your second data knob (treble).
6. Start and stop track by using down switch.
7. Hold a note or pitch by using the up switch.
8. Reverse or back-up by using both up and down at the same time
Sample and Play
1. Program #64
2. Press expression pedal forward till pedal indicator LED begins flashing
3. Play for 6 seconds, (LED should stop flashing and turn red while it
records).
4. After recording is done, move pedal forwards- sample plays
5. Move pedal back, sample plays in reverse
Sample Loop
1. Program #63
2. Repeat the above steps 2 & 3
3. Now your phrase is looping and you can control the loop volume.
Rhythm patterns
1. Push the Rhythm button on panel.
2. Knob 1 does the rhythm patterns.
3. Knob 2 adjusts tempo.
4. Knob 5 adjusts rhythm pattern volume.
Virtual Feed backer
Go to program #54- Play a single note for best results.
1. Pedal in full down position adds vibrato to sustaining note.
2. Back off half way for infinite sustain.
4
Hide quick links:
Advertisement
