Cleaning and checking
the machine
Cleaning the scanner glass
a
Unplug the machine from the electrical
socket.
b
Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
1
2
c
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
60
In addition to cleaning the glass strip with
A
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
A
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
3
When there is a
spot of dirt or
correction fluid
on the glass strip
the printed
sample shows a
vertical line.
Note
i
After the glass
strip is cleaned
the vertical line is
gone.