Troubleshooting Guide - Bowflex 7 Series Owner's Manual

troubleshooting Guide

PROBLEM
Treadmill will not start
Elevation not accurate
Speed not accurate
Walking belt slips
Walking belt not centered
Heart rate not displayed
(using chest strap)
Treadmill squeaks
Treadmill will not fold up
Locating the Circuit breaker On your treadmill:
The breaker is near the front of the treadmill and near the power cord.
30
CAUSE
Not plugged in
Safety pull pin not inserted.
Treadmill circuit breaker tripped.
Out of calibration.
Out of calibration.
Set in wrong units.
Walking belt loose.
Walking belt tension not centered
across the rear roller.
Transmitter not making good contact
with skin.
Electromagnetic interference.
Pivot points need lubrication.
Incline not set to zero
CORRECTION
Plug into three prong grounded outlet.
Insert safety pull pin.
Reset circuit breaker.
Re-calibrate unit.
Re-calibrate unit.
Change units.
Adjust walking belt tension. (See page 27)
Adjust walking belt tension. (See page 27)
Moisten skin contact area on the chest strap, or
turn chest strap upside down.
Turn off any television, microwave or computer
within 6 feet (2 meters) of treadmill.
Lubricate pivot points.
Power up machine and set incline to zero. If
incline can not be set to zero, calibrate machine.
Taking Care of Your Treadmill