Operation; Operating Panel - GE VH Series 700 User Manual

4 - Operation

4.1

Operating panel

fig. 4.1: operating panel
switch / LED
1 - 'on' switch
2 - 'off' switch
3 - LED 'operation'
4 - LED 'on bypass'
5 - LED 'on battery'
6 - LED 'alarm'
7 - LED bar 'runtime capacity'
8 - LED bar 'load'
modifications reserved
OPM_VHE_XXX_0K7_3K0_XGB_V010
3
4
5
6
main function
switches on the UPS, starts quick battery test (see 4.6)
switches off the UPS
on when the UPS is operating
blinks if the UPS is in standby mode
on when the UPS operates in bypass mode: the incoming mains power is
channeled directly to the load
on in case of battery operation: the mains power fails, and the internal
batteries supply the required power until either they are depleted or mains
power returns.
blinks in case of an alarm
the remaining available battery runtime for the actual load, in % of the
maximum runtime with the actual load
indicates to what extent the output capacity of the UPS is used by the
actual load. If e.g. the 25% and 50% LED are on, the load exceeds 50% of
the maximum load. If all 4 LEDs are on the unit operates in overload. As this
is an abnormal situation the alarm LED will blink as well.
More info in section 4.3.2.
12
1
2 7 8
User manual VH Series 700-3000 UPS 1.0 (GB)