Digitaliocontrol - Toshiba teli BG030 Instruction Manual

DigitalIOControl

This section describes DigitalIOControl category for the BG series.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
● Registers
Register Visibility
LineSelector Expert
LineMode Expert
LineInverter Expert
LineSource Expert
LineFormat Expert
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Fig. Selectable signals
Access
R/W Selects the Line of I/O connector.
R Returns the direction of each Line signal.
R/W Selects the polarity of GPIO output signal.
R/W Selects the source of the output signal.
R Returns the type of each Line signal.
Description
54 / 85
D4211908E
http://www.toshiba-teli.co.jp/index.htm