Toshiba teli BG030 Instruction Manual page 50

Anti-Chattering control filters noise and unstable logic value of the trigger input signal.
Details of Random Trigger Shutter operation, refer to "Timing" of "Specification".
● Registers
Register
TriggerSelector
TriggerMode
TriggerSoftware
TriggerSource
TriggerActivation
TriggerDelay
TriggerSamplingPeriod
● Setting
- Selects trigger mode
Set the following value to "TriggerMode" register. Setting value is Enumeration type.
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Fig. Anti-Chattering
Visibility Access
Beginner R Returns the type of trigger.
Beginner R/W Selects Random Trigger Shutter mode.
Beginner W Executes software trigger.
Beginner R/W Selects trigger source of Random Trigger Shutter.
Beginner R/W Selects trigger polarity of hardware trigger.
Expert R/W Sets trigger delay.
Expert R/W Sets sampling period for Anti-Chattering.
setting value
Off (*)
On
Description
Operation Mode
Normal Shutter Mode
Random Trigger Shutter mode
* initial factory setting
49 / 85
D4211908E
http://www.toshiba-teli.co.jp/index.htm