Toshiba teli BG030 Specification page 12

5.11 GPIO
Selected signals are output from GPIO pins of I/O connector. Following signals are selectable.
- VD
- TIMER0 ACTIVE
- EXPOSURE ACTIVE
- FRAME ACTIVE
- FRAME TRANSFER
- FRAME TRIGGER WAIT
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
: Internal VD sync signal.
: This signal can be used as strobe control signal. The delay time and
pulse width of this signal are configurable.
: Period from exposure start to end.
: Period from exposure start to CCD transfer completion.
: Period of Ethernet packet transfer.
: Indicating waiting a Random Trigger Shutter. An External trigger is
input during this period, exposure starts immediately.
10
D4211883D
http://www.toshiba-teli.co.jp/index.htm