Important Safeguards; Dismantling; Fit Batteries; Fill The Grinder - Russell Hobbs 12051-56 Instructions Manual

Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don't put the appliance in liquid, don't use it in a bathroom, near water, or outdoors.
3 Store the appliance away from direct sunlight, and, if possible, from fluorescent light.
4 Don't use the appliance for any purpose other than those described in these instructions.
5 Don't run the appliance empty, it may overheat.
6 Don't use the appliance if it's damaged or malfunctions.
C DISMANTLING
1 Turn the mill round so that you can see the rear.
2 Grip the cover in one hand, and the grinder in the other.
3 Turn the cover to move the pointer ) from L to U.
4 Lift the cover off.
C FIT BATTERIES
5 Fit 4 LR6 (AA) batteries into the motor unit.
6 The polarities (+ & –) are marked on the battery compartment.
C FILL THE GRINDER
7 Lift the motor unit off the grinder.
8 Fill the grinder with peppercorns, sea salt, dried herbs or spices.
9 Don't overfill, or it won't fit together.
10 Align the pointers ) ) on the bottom of the motor unit with the padlocks L U on the top of
the grinder, and lower the motor unit on to the grinder.
11 The spindle should slide easily into the centre of the motor unit.
household use only
2