Storage Device - Samsung 4 channel DVR User Manual

4 channel dvr
Table of Contents

Advertisement

• CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.)
Refer to "Using Virtual Keyboard". (Page 34)
• SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.
If set to <OFF>, the channel is not listed in the Auto Sequence mode.
• Screen Setup : The video appeared on the screen may vary
depending on the channel's camera, configure the DVR display
to your preferences.
Select a channel and adjust the <
<
(Contrast)>, and <
• Press the <Init> to initialize settings back to the default 50.
6. When the camera setup is done, press <OK>.

Storage Device

You can check information on storage devices.
Confirming Devices
You can check storage devices and their free space, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD).
Using the mouse may help make setup easier.
1. Use the up/down buttons () in <Device> window to
move to <Storage Device>, and press [ENTER] button.
2. Select <Device>.
• No. : Shows the assigned number of the internal HDD.
• Used/Total : Shows the used/total capacity of the storage
device.
• Used : Sets the storage device's usage.
- USB memory is used for backup purpose only.
• Status/Management : Shows the current status of the HDD,
as in Normal/Check/Replace.
- Normal : Available to use
- Check : Available to use but recommended to replace
- Replace : Requires immediate replacement.
3. To move to the previous menu, press <OK>.
(Brightness)>,
(Color)> of the selected channel.
Screen Setup
CH1
50
50
50
Init
OK
Cancel
Storage Device
Device
Format
HDD Alarm
Device
No.
Used/Total
Used
HDD
1
12.28G/499.37G
Internal
HDD Map
OK
Cancel
Apply to All CH
Status/Management
Normal
English _43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sde-3004Sde-3001Sde-3003

Table of Contents