1050 Fan Assembly And Heat Sink Assembly - Lenovo IdeaPad S210 Touch Hardware Maintenance Manual

1050 Fan assembly and Heat Sink assembly

For access, remove this FRU:
• "1010 Battery pack" on page 34
Figure 5. Removal steps of fan assembly and heat sink assembly
Loosen four screws
Unplug the fan connector in the direction shown by arrow
screws c .
When installing: Make sure that the fan connector is attached firmly to the
system board.
Step Screw (quantity)
a M2 × 3 mm, flat-head, nylok-coated (3)
M2 × 5 mm, flat-head, nylok-coated (2)
Lenovo S210/S210 Touch/S215/S215 Touch
a
, and remove the heat sink assembly.
a
a
b
a
a
b , Loosen three
c
c
c
Color
Black
Black
Torque
1.35 kgfcm
1.85 kgfcm
41